Welcome, Log in
-- Price: lowest first Price: highest first Product Name: A to Z Product Name: Z to A In-stock first Sort by
THIS IS A PAIR OF HEADLAMP "CHROME MESH STONEGUARDS" THAT FIT ONTO THE HEADLAMP RIMS FOR ALL MORRIS MINORS AND ANY OTHER CLASSIC CAR FITTED WITH LUCAS 7" inch diameter HEADLIGHTS . To fit remove the outer headlamp chrome rim LMP157 ,loosen the 3 phillips headed screws on the inner chrome rim LMP160 ,fit the 3 retaining clips(suppli
Select to compare
SPECIAL LONG LASTING :- Polyurethane Bush (fits the front suspension Lower Eyebolts) set of 4 bushes enough for one vehicle.WILL FIT ALL TYPES OF MORRIS MINORS.
BACK INSTOCK :- HEAVYDUTY LONG LASTING Polyurethane Bushes (FRONT SUSPENSION Top Trunnion) set of 4 bushes enough for one vehicle.WILL FIT ALL TYPES OF MORRIS MINORS.
THIS IS THE BONNET SAFETY CATCH THAT FITS AT THE FRONT OF THE BONNET BY THE RADIATOR.THIS SHOULD BE REPLACED IF YOURS IS DAMAGED OR MISSING !
HEAVYDUTY BUSHES AVAILABLE FOR LONGER LASTING SERVICE,THIS SET OF 4 BUSHES WILL FIT ALL MORRISMINORS FRONT SUSPENSION TIEBARS ,TOP QUALITY !
THE BEST QUALITY AND LONG LASTING HEAVY DUTY Polyurethane Bush set (to fit :-Rear Shackle/rear roadsprings) set of 12 bushes enough for one saloon,traveller,or convertible.
THESE WIPAC Halogen Headlamps are a pair of (R/H/D ) RIGHT HAND DRIVE UNITS for the "UK" MARKET. SEE WHERE YOU ARE GOING WITH THESE BRIGHT NEW HEADLAMPS! AND VERY EASY TO FIT.COMPLETE WITH HALOGEN BULBS.WILL FIT ALL MORRIS MINORS THAT HAVE THE NORMAL 7" diameter SEALED BEAM UNITS FITTED. For the early vehicles you may als
THESE ARE THE WIPAC Halogen Headlamps Conversions,a pair of (L/H/D) LEFT HAND DRIVE (NON UK) TYPE. SEE WHERE YOU ARE GOING WITH THESE BRIGHT NEW HEADLAMPS! AND VERY EASY TO FIT.COMPLETE WITH HALOGEN BULBS. WILL FIT ALL MORRIS MINORS that normally have the 7"sealed beam units fitted,for the early vehicles you may need to order
THIS IS THE REPLACEMENT FILTER FOR THE CANNISTER CONVERSION KIT PART NUMBER 10M801.note :- suitable for cars that have been converted to this type of kit.\r\n(note :- not suitable for splitscreen 803cc models)
THIS "PAIR" OF STAINLESS STEEL SILL RAIL FINISHERS WILL FIT ALL 4DOOR MORRIS MINOR SALOONS.AND WILL MAKE YOUR MORRIS MINOR LOOK VERY SMART ! They are bolted onto the kickplates (RP110) below the doors and can be seen from outside the vehicle.And yes the price is for a "pair" enough for one vehicle.
THIS "PAIR" OF DELUXE Polished Stainless Steel Sill Rails will fit all 2door saloons,travellers,and convertibles.you can also cut these down in length to fit a van or pickup.THIS IS THE RAIL /CHANNEL WHICH IS FITTED BELOW THE FRONT DOORS (bolted to the kickplate RP110) and can be seen from outside the vehicle.NO MORE PAINTING OR RU
items: 10 15
No products
Shipping £0.00 Total £0.00
Prices are tax excluded
Cart Check out
All best sellers
Enter a product name